Wiring Adaptor SiE-05C
384 Appendix Inverter K Series / PLUS Series
5.6 External Control Adaptor for Outdoor Units (DTA104A61 · DTA104A62)
Objective/use
By adding an adaptor for outside control of outdoor units to BS units or indoor units connected in a DIII-
NET, you can simultaneously select cool/heat mode for several outdoor units in the system, and it enables
demand control and low noise control.
5.6.1 Part Names and Functions
5.6.2 Cool/Heat Mode Unified Selection
(For Detailed Example of Wiring, See the Page Describing Cool/Heat Mode Control.)
Refer to “Cool/Heat Mode Switching” on P290.
<System Outline>
SI-05C.BOOK Page 384 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html
To Next Page
Loading...
