Dalsa S3-10-01k40-R User Manual

88 Spyder 3 CL User's Manual
03-032-20008-00 DALSA
Mnemonic Syntax Parameters Description
display pixel coeffs
dpc
x1 x2
Displays the pixel coefficients in the
order FPN, PRNU, FPN, PRNU, …
x1 = Pixel start number
x2= Pixel end number
in a range from
1 to 1024 or 2048
end of line sequence
els
i
Sets the end-of-line sequence:
0: Off
1: On
enable pixel coefficients
epc
i i
Sets whether pixel coefficients are
enabled or disabled.
The first parameter sets the FPN
coefficients where
i is:
0 = FPN coefficients disabled
1 = FPN coefficients enabled
The second parameter sets the PRNU
coefficients where
i is:
0 = PRNU coefficients disabled
1 = PRNU coefficients enabled
get camera model
gcm
Reads the camera model number.
get camera parameters
gcp
Reads all of the camera parameters.
get camera serial
gcs
Read the camera serial number.
get camera version
get exposure mode
Gcv
gem
Read the firmware version and FPGA
version.
Retrieves the current camera exposure
mode.
get fpn coeff
gfc
x
Read the FPN coefficient
x = pixel number to read in a range
from
1 – sensor pixel count.
get help
gh
Returns all of the available “get”
commands.
get line
gl
x x
Gets a line of video (without pixel
coefficients applied) displaying one
pixel value after another and the
minimum, maximum, and mean value
of the sampled line.
x = Pixel start number
x = Pixel end number
in a range from
1 to sensor pixel
count
.
get line average
gla
x x
Read the average of line samples.
x = Pixel start number
x = Pixel end number
in a range from
1 to sensor pixel
count
.

Dalsa S3-10-01k40-R Specifications

General

Brand	Dalsa
Model	S3-10-01k40-R
Category	Digital Camera
Language	English