Danfoss FC 101 - IP21;TYPE 1 Enclosure Kit

Step 4
Connect cable to frequency converter.
130BB778.10
Illustration 3.4 Connect Cable
NOTICE
Use the provided thread cutting screws to fasten
connector to the frequency converter, tightening torque
1.3 Nm.
3.1.3 IP21/TYPE 1 Enclosure Kit
IP21/TYPE 1 is an optional enclosure element available for
IP20 units.
If the enclosure kit is used, an IP20 unit is upgraded to
comply with enclosure IP21/TYPE 1.
130BB902.11
VLT
HVAC Basic Drive
A
B
C
OK
Alarm
Warn.
On
B
a
c
k
Hand
On
O
Reset
Auto
On
Status
Quick
Menu
Main
Menu
R
Illustration 3.5 H1-H5
130BB903.10
Illustration 3.6 Dimensions
Selection
VLT
®
HVAC Basic Drive FC 101 Design Guide
42 MG18C502 - Rev. 2013-09-06
33