4 How to Order
4.1 Configuration
4.1.1 Drive Configurator
It is possible to design a frequency converter according to
the application requirements by using the ordering
number system.
Frequency converters can be ordered as standard or with
internal options by using a type code string, i.e.
FC-101PK25T2E20H4XXCXXXSXXXXAXBXCXXXXDX
Use the Internet based Drive Configurator to configure the
right frequency converter for the right application and
generate the type code string. The Drive Configurator
automatically generates an 8-digit sales number to be
delivered to your local sales office.
Furthermore, a project list with several products can be
established and sent it Danfoss sales representative.
The frequency converter configurator can be found on:
www.danfoss.com/drives.
How to Order
VLT
®
HVAC Basic Drive FC 101 Design Guide
44 MG18C502 - Rev. 2013-09-06
44
To Next Page
Need help?
General
