Danfoss FC 102 Design Guide

8.10 Examples
141
8.10.1 Read Coil Status (01 HEX) 141
8.10.2 Force/Write Single Coil (05 HEX) 142
8.10.3 Force/Write Multiple Coils (0F HEX) 142
8.10.4 Read Holding Registers (03 HEX) 142
8.10.5 Preset Single Register (06 HEX) 143
8.10.6 Preset Multiple Registers (10 HEX) 143
8.11 Danfoss FC Control Profile
144
8.11.1 Control Word According to FC Profile (8-10 Control Profile = FC profile) 144
8.11.2 Status Word According to FC Profile (STW) (8-10 Control Profile = FC profile) 145
8.11.3 Bus Speed Reference Value 146
9 General Specifications and Troubleshooting
147
9.1 Mains Supply Tables
147
9.2 General Specifications
156
9.3 Efficiency
160
9.4 Acoustic Noise
160
9.5 Peak Voltage on Motor
161
9.6 Special Conditions
164
9.6.1 Purpose of Derating 164
9.6.2 Derating for Ambient Temperature 164
9.6.3 Derating for Ambient Temperature, Enclosure Type A 164
9.6.4 Derating for Ambient Temperature, Enclosure Type B 165
9.6.5 Derating for Ambient Temperature, Enclosure Type C 167
9.6.6 Automatic Adaptations to Ensure Performance 169
9.6.7 Derating for Low Air Pressure 169
9.6.8 Derating for Running at Low Speed 169
9.7 Troubleshooting
170
9.7.1 Alarm Words 174
9.7.2 Warning Words 175
9.7.3 Extended Status Words 176
Index
183
Contents Design Guide
MG11BC02 Danfoss A/S © Rev. 06/2014 All rights reserved. 5

Danfoss FC 102 Specifications

General

Brand	Danfoss
Model	FC 102
Category	DC Drives
Language	English