Danfoss TMT W FL

Mounting Flange Module Number (continued)
Nr. Note Item Spare Parts (Metric Version) Code No.
1) 2 Shaft seal 1.97×2.83×9,31 in
1) 3 O-ring 4.91×008 in
Shaft Module Number
Nr. Note Item Spare Parts (SAE Version) Code No.
M3 8 Tapered shaft 1 3/4”
1 : 8 incl. bearings
151Z2028
5 Nut 1 1/4 UN
7 Parallel key 1/16 × 7/16 × 1 1/4
6 Washer is not included in the module
Nr. Note Item Spare Parts (SAE Version) Code No.
M4 9 Splined shaft 1.5” incl. bearings 151Z2006
Nr. Note Item Spare Parts (SAE Version) Code No.
M5 11 Cylindrical shaft ∅1.5”
incl. bearings
151Z2029
10 Parallel key 3/8 × 3/8× 2 1/4
Motor Flange Module Number
Nr. Note Item Spare Parts (SAE Version) Code No.
M6 13 Motor flange TMT 250 - TMT 470 with drainport SAE 9/16-18 UNF 151Z2000
12 Drain plug (plastic) SAE 9/16 - 18 UNF
1) 3 O-ring 4.91×0.08 in
Nr. Note Item Spare Parts (SAE Version) Code No.
M6 13 Motor flange TMT 500 - TMT 630 with drainport SAE 9/16-18 UNF 151Z2194
12 Drain plug (plastic) SAE 9/16 - 18 UNF
1) 3 O-ring 4.91×0.08 in
Repair Instruction Orbital Motors TMT, TMT FL and TMT W FL
Spare Part List TMT
10 520L0351 • Rev EA • Feb 2014