Danfoss TMT W FL

Tools for Disassembly and Reassembly of TMT and TMT FL Motors
1. Holding tool SJ 151B9000-2.
2. Holding plate SJ 151B5000-4 (for installation on holding tool).
3. Stripper SJ 151B5000-2 for brake piston.
4. Mandrel SJ 151B5000-1 for shaft seal.
Repair Instruction
Orbital Motors TMT, TMT FL and TMT W FL
Tools for Disassembly and Reassembly of TMT and TMT FL Motors
520L0351 • Rev EA • Feb 2014 59