Danfoss TMT W FL User Manual

Mounting Flange Module Number
Nr. Note Item Spare Parts (Metric Version) Code No.
M1 1 Mounting flange with pilot ∅160 mm and BC ∅200 mm 151Z2001
1) 2 Shaft seal 50×72×8 mm
1) 3 O-ring 125×2 mm
Nr. Note Item Spare Parts (Metric Version) Code No.
M2 4 Mounting flange with pilot ∅125 mm and BC ∅160 mm 151Z2002
1) 2 Shaft seal 50×72×8 mm
1) 3 O-ring 125×2 mm
Shaft Module Number
Nr. Note Item Spare Parts (Metric Version) Code No.
M3 8 Tapered shaft ∅45 mm
1 : 10 incl. bearings
151Z2005
5 Nut M 30×2 mm
7 Parallel key 28×12×8 mm
6 Washer 56×31×4 mm
Nr. Note Item Spare Parts (Metric Version) Code No.
M4 9 Splined shaft 1.5” incl. bearings 151Z2037
Nr. Note Item Spare Parts (Metric Version) Code No.
M5 11 Cylindrical shaft ∅40 mm incl. bearings 151Z2017
10 Parallel key 70×12× 8 mm
Motor Flange Module Number
Nr. Note Item Spare Parts (Metric Version) Code No.
M6 13 Motor flange TMT 250 - TMT 470 with drain port G ¼” 151Z2058
12 Drain plug (plastic) G = ¼”
1) 3 O-ring 125×2 mm
Nr. Note Item Spare Parts (Metric Version) Code No.
M6 13 Motor flange TMT 500 - TMT 630 with drain port G 1/4” 151Z2195
12 Drain plug (plastic) G = ¼”
1) 3 O-ring 125×2 mm
1) Contained in set of seals, see Spare Part List TMT FL on page 29
Mounting Flange Module Number
Nr. Note Item Spare Parts (Metric Version) Code No.
M2 4 Mounting flange module with pilot ∅5 in and BC ∅6.374 in 151Z2015
Repair Instruction Orbital Motors TMT, TMT FL and TMT W FL
Spare Part List TMT
520L0351 • Rev EA • Feb 2014 9

Danfoss TMT W FL Specifications

General

Brand	Danfoss
Model	TMT W FL
Category	Engine
Language	English