Danfoss VACON 1000

2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
A
Screws
B
Filter cover
C
Air filter
Remove the air filter cover and remove the old filter.
Install a new air filter in place of the old one.
Reinstall the filter cover and tighten the screws.
Note the filter replacement date.
9.4.3 Air Filters of Control Cabinet
Procedure
Press the button and pull back the top part of the filter cover.
e30bi686.10
1
2
Illustration 73: Releasing the Filter Cover
1
Filter cover
2
Air filter
Remove the air filter cover.
Remove the filter and replace it with a new one.
Reinstall the filter cover.
Note the filter replacement date.
9.5 Replacing the HMI Battery
Procedure
Remove the screws at the back side of the HMI.
A
A
e30bi723.10
Illustration 74: Locations of the HMI Cover Mounting Screws
A
Cover mounting screws
AQ363633621020en-000201 / 172F311784 | Danfoss A/S © 2021.06
Maintenance
VACON® 1000
Operating Guide