4.2.9 Summation Transformers 23
4.2.10 Operating with Capacitor Banks 24
4.2.11 Fuses 26
4.2.12 Mains Disconnectors 26
4.2.13 Control and CT Cable Routing 26
4.2.14 Control Wire Installation 26
4.2.15 Unscreened Control Wires 27
4.2.16 Electrical Installation, Control Cables 28
4.3 Installation Checklist
29
5 User Interface
30
5.1 Local Control Panel Operation
30
5.1.1 Modes of Operation 30
5.1.2 How to Operate Graphical LCP (GLCP) 30
5.1.3 Changing Data 33
5.1.4 Changing a Text Value 33
5.1.5 Changing a Group of Numeric Data Values 33
5.1.6 Changing of Data Value, Step-by-Step 33
5.1.7 Readout and Programming of Indexed Parameters 33
5.1.8 Quick Transfer of Parameter Settings with the LCP 34
5.1.9 Initialisation to Default Settings 34
5.1.10 RS485 Bus Connection 35
5.1.11 Connection to a PC 35
6 Applications and Basic Programming
36
6.1 Paralleling of Active Filters
36
6.2 Programming
38
6.3 Description of Parameters
41
6.4 0-** Operation/Display
41
6.5 5-** Digital I/O Mode
46
6.6 8-** General Settings
48
6.7 14-2* Trip Reset
50
6.8 15-** Drive Information
52
6.9 16-** Data Readouts
56
6.10 300-** AF Settings
58
6.11 301-** AF Readouts
61
6.12 Parameter Lists
62
6.12.1 Default Settings 62
6.12.2 0-** Operation/Display 63
6.12.3 5-** Digital In/Out 64
6.12.4 8-** Comm. and Options 64
Contents Operating Instructions
2 Danfoss A/S © 09/2014 All rights reserved. MG90V302
To Next Page
Loading...
Need help?
General