Danfoss vlt aqua Programming Guide

21-40 Ext. 2 Normal/Inverse Control
Option: Function:
See par. 21-20,
Ext. 1 Normal/Inverse Control , for details.
21-41 Ext. 2 Proportional Gain
Option: Function:
See par. 21-21,
Ext. 1 Proportional Gain , for details.
21-42 Ext. 2 Integral Time
Option: Function:
See par. 21-22,
Ext. 1 Integral Time , for details.
21-43 Ext. 2 Differentiation Time
Option: Function:
See par. 21-23,
Ext. 1 Differentiation Time , for details.
21-44 Ext. 2 Diff. Gain Limit
Option: Function:
See par. 21-24,
Ext. 1 Diff. Gain Limit , for details.
2.18.7. 21-5* Closed Loop 3 Ref/Fb
Configure Extended Closed Loop 3 Controller reference and feedback.
21-50 Ext. 3 Ref/Feedback Unit
Option: Function:
See par. 21-10,
Ext. 1 Ref/Feedback Unit , for details.
21-51 Ext. 3 Minimum Reference
Option: Function:
See par. 21-11,
Ext. 1 Minimum Reference , for details.
21-52 Ext. 3 Maximum Reference
Option: Function:
See par. 21-12,
Ext. 1 Maximum Reference , for details.
21-53 Ext. 3 Reference Source
Option: Function:
See par. 21-13,
Ext. 1 Reference Source , for details.
21-54 Ext. 3 Feedback Source
Option: Function:
See par. 21-14,
Ext. 1 Feedback Source , for details.
VLT
®
AQUA Drive Programming Guide 2. Parameter Description
MG.20.O2.02 - VLT
®
is a registered Danfoss trademark 193
2

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled