Danfoss vlt aqua Programming Guide

Par. No. # Parameter description Default value 4-set-up Change during opera-
tion
Conver-
sion index
Type
31-00 Bypass Mode [0] Drive All set-ups TRUE - Uint8 31-01 Bypass Start Time Delay 30 s All set-ups TRUE 0 Uint16 31-02 Bypass Trip Time Delay 0 s All set-ups TRUE 0 Uint16
31-03 Test Mode Activation [0] Disabled All set-ups TRUE - Uint8
31-10 Bypass Status Word 0 N/A All set-ups FALSE 0 V2
31-11 Bypass Running Hours 0 h All set-ups FALSE 74 Uint32
31-19 Remote Bypass Activation [0] Disabled 2 set-ups TRUE - Uint8
3.1.24. 31-** Bypass Option
3. Parameter Lists VLT
®
AQUA Drive Programming Guide
288 MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
3

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled