Danfoss vlt aqua Programming Guide

2.2.8. 0-6* Password
Define password access to menus.
0-60 Main Menu Password
Option: Function:
[100]
*
-9999 - 9999 Define the password for access to the Main Menu via the [Main
Menu] key. If par. 0-61
Access to Main Menu w/o Password is
set to
Full access [0], this parameter will be ignored.
0-61 Access to Main Menu w/o Password
Option: Function:
[0]
*
Full access Disables password defined in par. 0-60 Main Menu Password .
[1] Read only Prevent unauthorized editing of Main Menu parameters.
[2] No access Prevent unauthorized viewing and editing of Main Menu param-
eters.
[3] Bus: Read only Read only functions for parameters on fieldbus and/ or FC
standard bus.
[4] Bus: No access No access to parameters is allowed via fieldbus and/ or FC
standard bus.
[5] All: Read only Read only function for parameters on LCP, fieldbus or FC stand-
ard bus.
[6] All: No access No access from LCP, fieldbus or FC standard bus is allowed.
If
Full access [0] is selected then parameters
0-60, 0-65 and 0-66 will be ignored.
0-65 Personal Menu Password
Range: Function:
200
*
[0 - 999] Define the password for access to the Quick Menu via the [Quick
Menu] key. If par. 0-66
Access to Personal Menu w/o Pass-
word
is set to Full access [0], this parameter will be ignored.
0-66 Access to Personal Menu w/o Password
Option: Function:
[0]
*
Full access Disables password defined in par. 0-65 Personal Menu Pass-
word
.
[1] Read only Prevents unauthorized editing of Quick Menu parameters.
[2] No access Prevents unauthorized viewing and editing of Quick Menu pa-
rameters.
If par. 0-61
Access to Main Menu w/o Password is set to Full access [0] then this parameter will
be ignored.
VLT
®
AQUA Drive Programming Guide 2. Parameter Description
MG.20.O2.02 - VLT
®
is a registered Danfoss trademark 41
2

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled