Danfoss vlt aqua Programming Guide

[104] Torque relative to lim-
it
[105] Torque relative to rat-
ed
[106] Power
[107] Speed
[108] Torque
[113] Ext. Closed Loop 1
[114] Ext. Closed Loop 2
[115] Ext. Closed Loop 3
5-60 Terminal 27 Pulse Output Variable
Option: Function:
[0]
*
No operation Same options and functions as par. 5-6* Pulse Outputs .
Select the operation variable assigned for terminal 27 readouts.
This parameter cannot be adjusted while the motor is running.
5-62 Pulse Output Maximum Frequency #27
Range: Function:
5000Hz
*
[0 - 32000 Hz] Set the maximum frequency for terminal 27, corresponding to
the output variable selected in par. 5-60.
This parameter cannot be adjusted while the motor is running.
5-63 Terminal 29 Pulse Output Variable
Option: Function:
[0]
*
No operation Select the variable for viewing on the terminal 29 display.
This parameter cannot be adjusted while the motor is running.
5-65 Pulse Output Maximum Frequency #29
Option: Function:
[5000H
z]
*
0 - 32000 Hz Set the maximum frequency for terminal 29 corresponding to
the output variable set in par. 5-63.
This parameter cannot be adjusted while the motor is running.
5-66 Terminal X30/6 Pulse Output Variable
Option: Function:
[0]
*
No operation Select the variable for read-out on terminal X30/6. This param-
eter cannot be adjusted while the motor is running.
This parameter is active when option module MCB 101 is instal-
led in the frequency converter.
2. Parameter Description VLT
®
AQUA Drive Programming Guide
94 MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
2

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled