Danfoss VLT AutomationDrive FC 300 Series Programming Guide

Option
Name
Description
[14]
Earth fault warning
[17]
Controlword timeout warning
[19]
Discharge temp high warning
[22]
Hoist mech brake warning
[23]
Internal fans warning
[24]
External fans warning
[25]
Brake resistor short circuit warning
[26]
Brake powerlimit warning
[27]
Brake chopper short circuit warning
[28]
Brake check warning
[29]
Heatsink temperature warning
[30]
Motor phase U warning
[31]
Motor phase V warning
[32]
Motor phase W warning
[34]
Fieldbus communication warning
[36]
Mains failure warning
[40]
T27 overload warning
[41]
T29 overload warning
[45]
Earth fault 2 warning
[47]
24V supply low warning
[58]
AMA internal fault warning
[59]
Current limit warning
[60]
External interlock warning
[61]
Feedback error warning
[62]
Frequency max warning
[64]
Voltage limit warning
[65]
Controlboard overtemp warning
[66]
Heatsink temp low warning
[68]
Safe stop warning
[73]
Safe stop autorestart warning
[76]
Power unit setup warning
[77]
Reduced powermode warning
AU275636650261en-000101 / 130R0334284 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English