Danfoss VLT AutomationDrive FC 300 Series Programming Guide

4.
Click Read from drive.
e30bg260.11
Illustration 90: MCT 10, Read From Drive
The service log view in MCT 10 looks as shown in Illustration 91. Use the cursor to view the detailed readings at a specific
time.
e30bg261.11
Illustration 91: Service Log View, 5 s
Use the zoom function to focus on the last 250 ms before the fault.
5.15.7 Alarms that Trigger a Service Log Record
Table 777: Alarms Triggering a Service Log Record
#
Alarm title
4
Mains phase loss
5
DC voltage high
6
DC voltage low
7
DC overvolt
8
DC undervolt
9
Inverter overld.
10
Motor ETR over
12
Torque limit
AU275636650261en-000101 / 130R0334486 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English