Danfoss VLT AutomationDrive FC 300 Series Programming Guide

Option
Name
Description
[1]
LCP off
[4]
Internal fan off
[7]
Gatedrive off
[10]
Mains off
[13]
External fan off
[255]*
Ready to operate
Parameter 14-48 PROFIEnergy Desired State
Table 739: Parameter 14-48 PROFIEnergy Desired State
14-48 PROFIEnergy Desired State
Default value: [255] Ready to operate
Parameter type: Option
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: False
Option
Name
Description
[1]
LCP off
[4]
Internal fan off
[7]
Gatedrive off
[10]
Mains off
[13]
External fan off
[255]*
Ready to operate
Parameter 14-49 PROFIEnergy Info
Table 740: Parameter 14-49 PROFIEnergy Info
14-49 PROFIEnergy Info
Default value: 0
Parameter type: Range, 0 - 0x7ffffff, Array [115]
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: True
Read-out information about PROFIEnergy.
5.14.6 14-5* Environment
AMA and Motor Filters
The following table details the recommended AMA options when motor filters are connected between drive and motor. AMA is
independent of the selection made in parameter 1-00 Configuration Mode and parameter 1-01 Motor Control Principle.
AU275636650261en-000101 / 130R0334 | 467Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English