Use the result of comparator 4.
Use the result of comparator 5.
Use the result of logic rule 4.
Use the result of logic rule 5.
Available if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced
ETR. If alarm 164, ATEX ETR cur.lim.alarm is active, the output is 1.
Available if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced
ETR. If alarm 166, ATEX ETR freq.lim.alarm is active, the output is 1.
Available if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced
ETR. If alarm 163, ATEX ETR cur.lim.warning is active, the output is 1.
Available if parameter 1-90 Motor Thermal Protection is set to [20] ATEX ETR or [21] Advanced
ETR. If warning 165, ATEX ETR freq.lim.warning is active, the output is 1.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
AU275636650261en-000101 / 130R0334 | 401Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide