Danfoss VLT AutomationDrive FC 300 Series Programming Guide

Option
Name
Description
[1005]
Mv/cls mrk/lt off
[1006]
Next 2 mrk/lt off
[1007]
Poly5/late offs
[2000]
Camstart mast mrk
Parameter 33-24 Marker Number for Fault
Table 1186: Parameter 33-24 Marker Number for Fault
33-24 Marker Number for Fault
Default value: 10
Parameter type: Range, 0 - 10000
Setup: 2 setups
Conversion index: 0
Data type: Uint16
Change during operation: True
Parameter 33-26 Velocity Filter
Table 1187: Parameter 33-26 Velocity Filter
33-26 Velocity Filter
Default value: 0
Parameter type: Range, -1073741824 - 1073741823 us
Setup: 2 setups
Conversion index: -6
Data type: Int32
Change during operation: True
Parameter 33-27 Offset Filter Time
Table 1188: Parameter 33-27 Offset Filter Time
33-27 Offset Filter Time
Default value: 0
Parameter type: Range, 0 - 1073741823 ms
Setup: 2 setups
Conversion index: -3
Data type: Uint32
Change during operation: True
Parameter 33-28 Marker Filter Configuration
Table 1189: Parameter 33-28 Marker Filter Configuration
33-28 Marker Filter Configuration
Default value: [0] Marker filter 1
Parameter type: Option
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: True
Option
Name
Description
[0]*
Marker filter 1
[1]
Marker filter 2
[2]
Correction syncfact
[4]
Correction time
[16]
No marker dist. corr
AU275636650261en-000101 / 130R0334 | 605Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English