Danfoss VLT AutomationDrive FC 361 - Page 160

40-43 Fault Log: Voltage
Range: Function:
0 V* [0 - 6000 V] View the motor voltage when the
logged event occurred.
40-44 Fault Log: DC Link Voltage
Range: Function:
0 V* [0 - 10000 V] View the DC-Link voltage when the
logged event occurred.
40-45 Fault Log: Control Word
Range: Function:
0* [0 - 65535 ] View the control word sent from
the drive, when the logged event
occurred.
40-46 Fault Log: Status Word
Range: Function:
0* [0 - 65535 ] View the status word sent from the
drive, when the logged event
occurred.
Parameter Descriptions VLT® AutomationDrive FC 361
158 Danfoss A/S © 03/2019 All rights reserved. MG06J202
44