Danfoss VLT AutomationDrive FC 361 Programming Guide

Contents
1 Introduction
3
1.1 How to Read This Programming Guide
3
1.2 Denitions
4
1.3 Electrical Wiring - Control Cables
7
2 Safety
10
2.1 Safety Symbols
10
2.2 Qualied Personnel
10
2.3 Safety Precautions
10
3 Programming
12
3.1 Graphical and Numerical Local Control Panels
12
3.1.1 LCD Display 13
3.1.2 Quick Transfer of Parameter Settings between Multiple Frequency Converters 15
3.1.3 Display Mode 15
3.1.4 Display Mode - Selection of Readouts 15
3.1.5 Parameter Set-up 17
3.1.6 Quick Menu Key Functions 17
3.1.7 Initial Commissioning 18
3.1.8 Main Menu Mode 19
3.1.9 Parameter Selection 19
3.1.10 Changing Data 19
3.1.11 Changing a Text Value 19
3.1.12 Changing a Data Value 20
3.1.13 Innitely Variable Change of Numeric Data Value 20
3.1.14 Value, Step by Step 20
3.1.15 Readout and Programming of Indexed Parameters 20
3.1.16 How to Program on the Numerical Local Control Panel 20
3.1.17 LCP Keys 22
4 Parameter Descriptions
24
4.1 Parameters: 0-** Operation and Display
24
4.2 Parameters: 1-** Load and Motor
32
4.3 Parameters: 2-** Brakes
48
4.4 Parameters: 3-** Reference/Ramps
50
4.5 Parameters: 4-** Limits/Warnings
61
4.6 Parameters: 5-** Digital In/Out
66
4.7 Parameters: 6-** Analog In/Out
81
4.8 Parameters: 7-** Controllers
87
4.9 Parameters: 8-** Communications and Options
93
Contents Programming Guide
MG06J202 Danfoss A/S © 03/2019 All rights reserved. 1

Danfoss VLT AutomationDrive FC 361 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 361
Category	DC Drives
Language	English