Danfoss VLT FC 103 Programming Guide

15-34 Alarm Log: Status
Range: Function:
0 * [0 - 1 ]
3.12.5 15-4* Drive Identification
Parameters containing read only information about the
hardware
and software configuration of the frequency
converter.
15-40 FC Type
Option: Function:
View the FC type. The read-out is identical to the ADAP-
KOOL
Drive Series power field of the type code
definition, characters 1-6.
15-41 Power Section
Option: Function:
View the FC type. The read-out is identical to the ADAP-
KOOL
Drive Series power field of the type code
definition, characters 7-10.
15-42 Voltage
Option: Function:
View the FC type. The read-out is identical to the ADAP-
KOOL
Drive Series power field of the type code
definition, characters 11-12.
15-43 Software Version
Range: Function:
0 * [0 - 0 ] View the combined SW version (or ‘package
version’)
consisting of power SW and control SW.
15-44 Ordered Typecode String
Range: Function:
0 * [0 - 0 ] View the type code string used for re-ordering the
frequency
converter in its original configuration.
15-45 Actual Typecode String
Range: Function:
0 * [0 - 0 ] View the actual type code string.
15-46 Frequency Converter Ordering No
Range: Function:
0 * [0 - 0 ] View the 8-digit ordering number used for re-
ordering
the frequency converter in its original
configuration.
15-47 Power Card Ordering No
Range: Function:
0 * [0 - 0 ] View the power card ordering number.
15-48 LCP Id No
Range: Function:
0 * [0 - 0 ] View the LCP ID number.
15-49 SW ID Control Card
Range: Function:
0 * [0 - 0 ] View the control card software version number.
15-50 SW ID Power Card
Range: Function:
0 * [0 - 0 ] View the power card software version number.
15-51 Frequency Converter Serial Number
Range: Function:
0 * [0 - 0 ] View the frequency converter serial number.
15-53 Power Card Serial Number
Range: Function:
0 * [0 - 0 ] View the power card serial number.
3.12.6 15-6* Option Ident.
This read-only parameter group contains information about
the
hardware and software configuration of the options
installed in slots A, B, C0 and C1.
15-60 Option Mounted
Array [8]
Range: Function:
0 * [0 - 0 ] View the installed option type.
15-61 Option SW Version
Array [8]
Range: Function:
0 * [0 - 0 ] View the installed option software version.
15-62 Option Ordering No
Array [8]
Range: Function:
0 * [0 - 0 ] Shows the ordering number for the installed
options.
15-63 Option Serial No
Array [8]
Range: Function:
0 * [0 - 0 ] View the installed option serial number.
Parameter Description
VLT
®
Refrigeration Drive Programming Guide
102 MG16H102 - VLT
®
is a registered Danfoss trademark
33

Danfoss VLT FC 103 Specifications

General

Brand	Danfoss
Model	VLT FC 103
Category	DC Drives
Language	English