2.1.6 Function Setups
The Function set-up provides quick and easy access to all
parameters
required for the majority of VLT Refrigeration
Drive applications including most VAV and CAV supply and
return fans, cooling tower fans, Primary, Secondary and
Condenser Water Pumps and other pump, fan and
compressor applications.
How to access Function Set-up - example
How to change the output on “Analog output 42”
28.8%
14.4Hz
Auto Remote Running
5.66A
2.63kW
0kWh
1 (1)
130BT110.11
Status
Illustration 2.20 Step 1: Turn on the frequency converter (yellow
LED
lights)
130BT111.10
Q1 My Personal Menu
Q2 Quick Setup
Q3 Function Setups
Q5 Changes Made
13.7% 13.0A 1(1)
Quick Menus
Illustration 2.21 Step 2: Press the [Quick Menus] key (Quick
Menus
choices appear).
130BT112.10
Q1 My Personal Menu
Q2 Quick Setup
Q3 Function Setups
Q5 Changes Made
69.3% 5.20A 1(1)
Quick Menus
Illustration 2.22 Step 3: Press
▲
/
▼
to
scroll down to Function
Setups. Press [OK].
Q3
130BT113.10
Q3-1 General Settings
Q3-2 Open Loop Settings
Q3-3 Closed Loop Settings
Q3-4 Application Settings
28.4% 2.05A 1(1)
Function Setups
Illustration 2.23 Step 4: Function Setups choices appear. Choose
03-1 General
Settings. Press [OK].
130BT114.10
26.0%
Q3 - 10 Adv. Motor Settings
Q3 - 11 Analog Output
Q3 - 12 Clock Settings
Q3 - 13 Display Settings
7.14A 1(1)
Q3-1
General Settings
Illustration 2.24 Step 5: Press
▲
/
▼
to
scroll down to i.e. Q3-11
Analog Outputs. Press [OK].
130BA115.10
6 - 50 Terminal 42 Output
(100) Output frequency
26.3%
5.82A 1(1)
Analog Output
03.11
Illustration 2.25 Step 6: Choose 6-50
Terminal 42 Output. Press
[OK].
130BT116.10
43.4%
6-50 Terminal 42 Output
[107]
Speed
Analog Output
7.99A
Q3-11
1(1)
Illustration 2.26 Step 7: Press
▲
/
▼
to
select between the
different choices. Press [OK].
NOTE
For
the quickest and easiest setup of the FC 103, please
use the FC 103 Wizard (see chapter Introduction)
How to Programme
VLT
®
Refrigeration Drive Programming Guide
20 MG16H102 - VLT
®
is a registered Danfoss trademark
22