2-16 AC brake Max. Current
Range: Function:
100 %* [ 0
- 1000.0
%]
Enter
the maximum permissible current
when using AC brake to avoid
overheating of motor windings. The AC
brake function is available in Flux mode
only.
NOTE
2-16
AC brake Max. Current will not have effect when
1-10 Motor Construction = [1] PM, non salient SPM.
2-17 Over-voltage Control
Option: Function:
[0] Disabled No OVC required.
[2] * Enabled Activates OVC.
NOTE
2-17
Over-voltage Control will not have effect when
1-10 Motor Construction = [1] PM, non salient SPM.
NOTE
The
ramp time is automatically adjusted to avoid tripping
of the frequency converter.
Parameter Description
VLT
®
Refrigeration Drive Programming Guide
MG16H102 - VLT
®
is a registered Danfoss trademark
49
3 3
To Next Page
Loading...
Need help?
General