5-94 Pulse Out #27 Timeout Preset
Range: Function:
0 %* [0 - 100 %] Contains the frequency to apply to the
digital
output terminal 27, when it is
configured as [Bus Controlled Timeout] and
timeout is detected.
5-95 Pulse Out #29 Bus Control
Range: Function:
0 %* [0 - 100 %] Contains the frequency to apply to the
digital
output terminal 29, when it is
configured as [Bus Controlled].
5-96 Pulse Out #29 Timeout Preset
Range: Function:
0 %* [0 - 100 %] Contains the frequency to apply to the
digital
output terminal 29, when it is
configured as [Bus Controlled Timeout] and
timeout is detected
5-97 Pulse Out #X30/6 Bus Control
Range: Function:
0 %* [0 - 100 %] Contains the frequency to apply to the
digital
output terminal 27, when it is
configured as [Bus Controlled].
5-98 Pulse Out #X30/6 Timeout Preset
Range: Function:
0 %* [0 - 100 %] Contains the frequency to apply to the
digital
output terminal 6, when it is
configured as [Bus Controlled Timeout] and
time-out is detected.
Parameter Description
VLT
®
Refrigeration Drive Programming Guide
MG16H102 - VLT
®
is a registered Danfoss trademark
71
3 3
To Next Page
Loading...
