Danfoss VLT FC 302

Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion
index
Type
6-70 Terminal X45/1 output null All set-ups TRUE - Uint8
6-71 Terminal X45/1 min. scale 0.00 % All set-ups TRUE -2 Int16
6-72 Terminal X45/1 max. scale 100.00 % All set-ups TRUE -2 Int16
6-73 Terminal X45/1 bus control 0.00 % All set-ups TRUE -2 N2
6-74 Terminal X45/1 output timeout preset 0.00 % 1 set-up TRUE -2 Uint16
6-8* Analog Output 4
6-80 Terminal X45/3 output null All set-ups TRUE - Uint8
6-81 Terminal X45/3 min. scale 0.00 % All set-ups TRUE -2 Int16
6-82 Terminal X45/3 max. scale 100.00 % All set-ups TRUE -2 Int16
6-83 Terminal X45/3 bus control 0.00 % All set-ups TRUE -2 N2
6-84 Terminal X45/3 output timeout preset 0.00 % 1 set-up TRUE -2 Uint16
Programming Operating Instructions
84 Danfoss A/S © Rev. 2014-07-29 All rights reserved. MG37A202
66