Danfoss VLT FC 302 User Manual

Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
14-7* Compatibility
14-72 Legacy alarm word 0 N/A All set-ups FALSE 0 Uint32
14-73 Legacy warning word 0 N/A All set-ups FALSE 0 Uint32
14-74 Leg. ext. status word 0 N/A All set-ups FALSE 0 Uint32
14-8* Options
14-80
Option supplied by external 24 V
DC [1] Yes 2 set-ups FALSE - Uint8
14-89 Option detection
[0] Protect option
config. 1 set-up TRUE - Uint8
14-9* Fault Settings
14-90 Fault level null 1 set-up TRUE - Uint8
Programming Operating Instructions
MG37A202 Danfoss A/S © Rev. 2014-07-29 All rights reserved. 93
6 6

Danfoss VLT FC 302 Specifications

General

Brake Function	Built-in brake chopper in all units up to 22 kW
Output Voltage Range	0-100% of input voltage
Power Range	0.37 kW
Control Modes	VVCplus, Flux, U/f
Protection Features	Overvoltage, undervoltage, overcurrent, short circuit, overtemperature, overload
Communication Options	Modbus RTU, BACnet, Ethernet/IP, Profinet, Profibus, CANopen, DeviceNet
Ambient Temperature Range	-10°C to +50°C (derating above +40°C)
Enclosure Rating	IP20, IP21, IP55
Cooling Method	Air-cooled
Input Voltage	200-240V, 380-480V, 525-600V