Dascom DC-7600 - Page 89

Dascom DC-7600 User Guide V1.0
initialization.
Film Jam
Probable Cause: Retransfer film winding problem.
Action: Do not turn off power. Refer to Section 2.3 to reload the retransfer
film. Press SET Key to clear this warning and the printer will resume previous
printing after initialization.
Ribbon Jam
Probable Cause: Ribbon winding problem.
Action: D
o not turn off power. Refer to Section 2.2 to reload the ribbon. Press
SET Key to clear this warning and the printer will resume previous printing
after initialization.
Feeder Card
Jam
Pressing SET as LCD display shown may eject jammed card after initialization.
If the fault is not cleared after initialization, turn the rollers manually to clear
jammed card
Flip Card Jam
Pressing SET as LCD display shown may eject jammed card after initialization.
76