DataCard 150i User Manual

150i Desktop Card Personalization System 25
Magnetic Stripe Errors
When a Magnetic Stripe error occurs, a status code of H is sent to the Card
Wizard Application and the card is moved to the Reject Tray. Call for service if
the specified corrective action does not resolve the problem.
Error Message
(LCD)
Error
Code
(LCD)
Meaning Possible Cause
Corrective Action
(Operator)
The password requirements
for the system have not been
met.
Reinitialize the system. Try
sending card data again. Contact
the MIS department or your
application provider for
assistance.
TRACK_TABLE_NOT_F
OUND
MS 0902 The magnetic stripe
configuration files cannot be
accessed.
The flash memory files are
corrupt.
Reinitialize the system. Send card
data again.
HARDWARE_CONFIG_E
RROR
MS 0903 Invalid magnetic stripe
configuration
The flash memory files are
corrupt.
Reinitialize the system. Send card
data again.
INVALID_START_CODE MS 0910 Incorrect character in
customer record
Encoding data incorrect Send card data again. Try a
different customer record.
INVALID_START_SENTI
NEL
MS 0911 Incorrect character in
customer record
Encoding data incorrect Send card data again. Try a
different customer record.
INVALID_END_SENTINE
L
MS 0912 Incorrect character in
customer record
Encoding data incorrect Send card data again. Try a
different customer record.
INVALID_CHARACTER MS 0913 Incorrect character in
customer record
Encoding data incorrect Send card data again. Try a
different customer record.
INVALID_DATA_LENGT
H
MS 0914 Too many characters in
customer record
Encoding data incorrect Send card data again. Try a
different customer record.
Incorrect coercivity setting in
configuration menu
Send card data again. Confirm
that the coercivity configuration
setting is correct for the cards
used.
READ_OVERRUN_ERR
OR
MS 0915 Data written to magnetic
stripe could not be
confirmed
Cards with wrong coercivity
setting used.
Load correct card type.
NO_TRANSITIONS_FOU
ND
MS 0916 System unable to read
transitions on magnetic
stripe after writing
Cards loaded upside down or
backwards.
Load cards correctly.
NO_START_FOUND MS 0917 System unable to compare
magnetic stripe data written
to magnetic stripe data read
Cards loaded upside down or
backwards.
Load cards correctly.
START_POSITIION_ERR
OR
MS 0918 System unable to compare
magnetic stripe data written
to magnetic stripe data read
Cards loaded upside down or
backwards.
Load cards correctly.
LTJ_ERROR MS 0919 System unable to compare
magnetic stripe data written
to magnetic stripe data read
Faulty magnetic stripe on
card
Inspect card magnetic stripes for
visible flaws. Replace bad card
stock.
BBJ_ERROR MS 091A
System unable to compare
magnetic stripe data written
to magnetic stripe data read
Faulty magnetic stripe on
card
Inspect card magnetic stripes for
visible flaws. Replace bad card
stock.

DataCard 150i Specifications

General

Brand	DataCard
Model	150i
Category	Printer
Language	English