DataCard SP55 User Manual

26
SP Series Info Central: Troubleshooting
The laminate patch is
missing.
The supply spool is loaded in
the cartridge incorrectly.
The supply was moved and
the patch was used
previously.
Load the laminator supply
correctly and then send the
card to print again.
Advance the supply past the
used area.
If you cannot fix the problem,
contact your service provider.
What you see Possible causes Solutions

DataCard SP55 Specifications

General

Print Technology	Dye Sublimation
Print Resolution	300 dpi
Print Capabilities	Full-color, monochrome
Card Capacity	100 cards (input hopper), 30 cards (output hopper)
Card Sizes	CR80 (85.6 mm x 54 mm / 3.375" x 2.125")
Connectivity	USB
Power Requirements	100-240 VAC, 50/60 Hz
Operating System Support	Windows 7, 8, 10