Datafox EVO 3.5 Pure - Liste Presence

Handbuch Datafox EVO 3.5 Pure Seite 98 Datum: 06.08.2018 Version: 04.03.07.XX
5.9.7.5. Liste Presence
This list is created by the access controller itself.
This makes it possible to enable the tracking of people and rooms via several access controllers.
If the Antipassback function is to be used via several access controllers, this list must always be up-
dated by the software to all access controllers.
Example:
A room (example room ID 10) has several doors that are managed by different access control box-
es. If a person enters this room, an entry is created in the Presence list of this box that this person is
in the room.
The other access control boxes can now also be informed that the person with ID X is in room 10.
To do this, an entry in the Presence list must be created in the other boxes via your software (with
DLL).
This is done using the method DFCTableAppendRowData Append Data Row to the table.
The same applies if a person leaves the room, this entry must be deleted in the Other Access Con-
trol Boxes.
Name
Data type
Length
Description
ID
Number
(int)
4
ID of the person that is stored in the presence list.
RefLocation
Number
(int)
4
Reference to the ID of the room, defined in the table "Location", where this per-
son currently stays
TimeStamp
Number
(int)
10
Time stamp when the person entered the current room
Integer in seconds, starting 01.01.2000.