Datafox EVO 3.5 Pure - Automatic USB Detection and Driver Installation

Handbuch Datafox EVO 3.5 Pure Seite 32 Datum: 06.08.2018 Version: 04.03.07.XX
5.8.2. Automatic dedected conectet USB to PC
If the terminal is connected to a pc it will recognize the connection and will switch the communica-
tion to USB.
It is not necessary to switch the main communication to usb manually.
It’s especially useful for boxed devices.
This will save much time in the parameterizing process.

Note:
If the device is connected to a pc no other connections (for example Wi-Fi) will happen
If the USB-cable is disconnected it will automatically switch to the configured main com-
munication
DatafoxStudioIV will recog-
nize the device and a noti-
fication will pop up.
The studio will generate
an entry for the device.
On the device the follow-
ing icon is displayed: