Datalogic DX8200A

DX8200A
6
TROUBLESHOOTING GUIDE
Problem Suggestion
Communication:
the scanner “Network” LED is not lit.
• If the LED is OFF, check the connections
between the DX8200A slaves and the SC6000
or DX8200A master. If the error persists,
contact your Datalogic distributor.
How do I obtain my units’ serial
numbers?
• The device serial number is printed on a label
that is affixed above the connector panel of
the reader.
• The serial number is also displayed when
connecting the device through the Genius™
program.
• Serial numbers consist of 9 characters: one
letter, 2 numbers, another letter followed by 5
numbers.
72