Datalogic DX8200A Reference Manual

DX8200A
7
SOFTWARE FEATURES
Readable Codes Interleaved 2/5
Code 39 Standard
Codabar
Code 128
EAN 128
Code 93 (standard and full ASCII)
EAN/UPC (including Add-on 2 and Add-on 5)
Code selection Up to 10 codes during one reading phase
Headers and Terminators Up to 128-byte headers and 128-byte terminators
Operating modes On Line, Serial On Line, Automatic, Test,
PackTrack™, Continuous
Configuration modes Genius™ utility program
Parameter storage Non-volatile internal FLASH
ENVIRONMENTAL FEATURES
Operating temperature 0° to +50 °C (+32° to +122 °F)
Storage temperature -20° to +70 °C (-4° to +158 °F)
Humidity 90% non condensing
Ambient light immunity 20000 lux
Vibration resistance:
EN 60068-2-6
2 hours on each axis
Frequency range from 5 to 150 Hz;
Constant displacement 3 mm pk-pk from 5 to 9 Hz;
Constant acceleration 0.5 g from 9 to 150 Hz
Shock resistance:
IEC 68-2-27 test EA
3 shocks on each axis
30 g; 11 ms
VAC models VDC models
Protection class IP54* IP64*
PHYSICAL FEATURES
Mechanical dimensions
470 x 300 x 141 mm (18.50 x 11.81 x 5.55 in)
Weight
about 11 kg (24 lbs. 3 oz)
* sealed connectors required; use Harting RJ Industrial® Push Pull Ethernet connector for Ethernet
models.
74

Datalogic DX8200A Specifications

General

Scan speed	1000 sec/page
Sensor type	Laser
Dimensions (WxDxH)	470 x 300 x 147 mm
Standard interfaces	RS-232, RS-485
Power requirements	30 VCD
Power consumption (standby)	30 W
Keys quantity	3 keys
Product color	Black
LED indicators	Charging, Power
Housing material	Steel
International Protection (IP) code	IP64
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Weight	11000 g