Datalogic Gryphon I GBT/GM4200 Series User Manual

Replacing the Battery Pack
10 GRYPHON™ I GBT/GM4200
2. Carefully remove the battery cable out of its con-
nector and extract the battery pack from its slot.
3. Insert the new battery in the same position.
4. Plug the battery cable into its connector.
5. Insert the cover in the handle and screw it into
place.
NOTE: When inserting the new battery into the
handle, take care to position the battery and the
connector as illustrated above.

Datalogic Gryphon I GBT/GM4200 Series Specifications

General

Brand	Datalogic
Model	Gryphon I GBT/GM4200 Series
Category	Barcode Reader
Language	English