Datalogic Gryphon I GBT/GM4200 Series User Manual

Reading Parameters
28 GRYPHON™ I GBT/GM4200
READING PARAMETERS
Move the reader toward the target and center the aiming
pattern and illumination system to capture and decode
the image. See “Using the GBT/GM4200” on page 8" for
more information.
The aiming system will briefly switch off after the acquisi-
tion time, and if no code is decoded will switch on again
before the next acquisition. The illuminator will remain on
until the symbol is decoded.
As you read code symbols, adjust the distance at which
you are holding the reader.
GOOD READ GREEN SPOT DURATION
Successful reading can be signaled by a good read green
spot. Use the bar codes that follow to specify the duration
of the good read pointer beam after a good read.
GOOD READ GREEN SPOT DURATION
ENTER/EXIT PROGRAMMING MODE
Disabled
♦ Short (300 ms)

Datalogic Gryphon I GBT/GM4200 Series Specifications

General

Brand	Datalogic
Model	Gryphon I GBT/GM4200 Series
Category	Barcode Reader
Language	English