Datalogic Gryphon I GBT/GM4200 Series User Manual

Selecting the Interface Type
QUICK REFERENCE GUIDE 15
SELECTING THE INTERFACE TYPE
Upon completing the physical connection between the
reader and its host, proceed directly to Interface Selection
below for information and programming for the interface
type supported by the reader. Scan the appropriate bar
code to select your system’s correct interface type,
according to your application.
For interfaces other than those listed in this manual, see
the Gryphon™ I GBT/GM4200 Product Reference Guide
(PRG), available online at www.datalogic.com.
Interface Selection
The reader will support all the following host interfaces:
• RS-232 STD
• RS-232 WN
• IBM46XX port 9b (a specific cable is required)
• USB HID POS
• USB Toshiba TEC
• USB (Keyboard, COM, OEM)
• USB Composite (Keyboard + COM)
• Keyboard Wedge
Information and programming options for each interface
type are provided in this section. For defaults and additional
information associated with each interface, proceed to the
corresponding chapter in the Gryphon™ I GBT/GM4200 PRG
.

Datalogic Gryphon I GBT/GM4200 Series Specifications

General

Brand	Datalogic
Model	Gryphon I GBT/GM4200 Series
Category	Barcode Reader
Language	English