Datalogic Gryphon I GBT/GM4200 Series User Manual

Configuring the Interface
16 GRYPHON™ I GBT/GM4200
CONFIGURING THE INTERFACE
Scan the appropriate programming bar code to select the
interface type for your system.
NOTE: Unlike some other programming features
and options, interface selections require that you
scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code prior to scan-
ning an interface selection bar code.
Some interfaces require the scanner to start in
the disabled state when powered up. If additional
scanner configuration is desired while in this
state, pull the trigger and hold for 5 seconds. The
scanner will change to a state that allows pro-
gramming with bar codes.
RS-232
RS-232 standard interface
Select RS232-STD
RS-232 Wincor-Nixdorf
Select RS232-WN
RS-232 for use with OPOS/UPOS/JavaPOS
Select RS-232 OPOS

Datalogic Gryphon I GBT/GM4200 Series Specifications

General

Brand	Datalogic
Model	Gryphon I GBT/GM4200 Series
Category	Barcode Reader
Language	English