Datalogic GRYPHON - Field Adjustment Character; Code Length Tx

Enter Configuration Exit and Save Configuration
Ì$+;Î
DATA FORMAT
Ì$
-
?Î
69
F IELD A DJUSTMENT C HARACTER
c
Read the field adjustment character code:
field adjustment character
ÌEG-Î
d
Read the hexadecimal value corresponding to the character you want to use for field
adjustment. Valid characters are in the range 00-FE.
Example:
To define the field adjustment character = A:
Read
field adjustment character
+ 41
C ODE L ENGTH T X
 code length not transmitted
ÌEE0YÎ
code length transmitted in variable-digit format
ÌEE1\Î
code length transmitted in fixed 4-digit format
ÌEE2_Î
The code length is transmitted in the message after the Headers and Code Identifier characters.
The code length is calculated after performing any field adjustment operations.