Datalogic GRYPHON User Manual

Enter Configuration Exit and Save Configuration
Ì$+;Î
READING PARAMETERS
Ì$
-
?Î
82
S AFETY T IME
safety time
ÌBE&Î
Limits same
code consecutive reading.
Read 2 numbers in the range 00-99:
00 = no same code consecutive reading until reader is
removed (no decoding) for at least 400 ms.
01-99 = timeout from .1 to 9.9 seconds before a consecutive read
on same code.
 safety time = 0.5 sec
See par. 5.6.5 for details.
B EEPER I NTENSITY
* very low intensity
ÌBG0ZÎ
low intensity
medium intensity
ÌBG1]Î
ÌBG2`Î
 high intensity
ÌBG3cÎ
* This sets the beeper OFF for data entry, while for all other beeper signals it has the
meaning “very low intensity”. The Beeper Intensity parameter is effective for all operating
conditions described in par. 6.5.

Datalogic GRYPHON Specifications

General

Scanner Type	Handheld
Category	Barcode Reader
Drop Resistance	1.8 meters
IP Rating	IP65
Decoding Capability	1D and 2D barcodes
Light Source	LED
Scan Pattern	Linear or omnidirectional (depending on model)
Model	GRYPHON
Type	Handheld
Scan Technology	Laser or Imager (depending on model)
Humidity	5 to 95% NC (Non-Condensing)
Dimensions	Varies by model
Weight	Varies by model
Power Supply	Battery (Cordless Models)
Storage Temperature	-20°C to 60°C