2D Symbologies
136
Magellan
TM
3200VSi
Datamatrix — cont.
Datamatrix Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Appendix C, Alpha-Numeric Pad and scan the four digits (zero-padded) representing
the length.
Scan the END bar code.
NOTE
For Datamatrix bar codes, only the data characters are included in the
length calculations.
Any value set higher than 800 will be considered to be 800.
START / END
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 0800
To Next Page
Loading...
