Datalogic MAGELLAN 3200VSI - Good Read: When to Indicate

LED and Beeper Indicators
Product Reference Guide 25
Good Read: When to Indicate
This feature specifies when the scanner will provide indication (beep and/or flash its green LED)
upon successfully reading a bar code. Choices are:
• Good Read = Indicate after decode
• Good Read = Indicate after transmit
• Good Read = Indicate after CTS goes inactive, then active
NOTE
This option (Indicate after CTS goes inactive, then
active), which uses CTS, is only valid for RS-232 inter-
faces.
START / END
PROGRAMMING bar codes
After Decode
DEFAULT
After Transmit
After CTS goes inactive, then active
³