184
Magellan
TM
3200VSi
Export Scanner Status to microSD card
The data includes scanner ID, statistics and scanner health.
By scanning a label
1. Insert the microSD card into the scanner
2. Scan the status export label
<FNC3>STATUS<CR>
3. Upon scanner audio indication of completion, the scanner status text file named STATUS.TXT is saved to
the microSD card.
By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as AUTORUN.DLS
$START$
DUMPSTATS,DMPSTATS.TXT
$END$
2. Save or copy the AUTORUN.DLS file to the microSD card
3. Insert the microSD card into the scanner
4. Wait for about 3 seconds.
A scanner statistics file named DMPSTATS.TXT is saved to the microSD card.
From microSD Card to Scanner
Application code load to scanner
By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as AUTORUN.DLS
$START$
LOADSW,R96-APP1.BIN
$END$
2. Step 2: Save or copy file AUTORUN.DLS to microSD card and copy the application code (example R96-
APP1.BIN) to the microSD card.
3. Insert the microSD card into the scanner.
4. Upon scanner audio indication of completion, the application code R96-APP1.BIN is loaded to the scanner.
Typically, this takes about 45 seconds.
To Next Page
Loading...
