Datalogic MAGELLAN 3200VSI - Chapter 3. Image Capture; Image Capture; How to Capture an Image; Image Capture to a Microsd Card by Scanning a Special Label

Product Reference Guide 31
Chapter 3
Image Capture
Image Capture
How to Capture an Image
There are two methods of capturing images as discussed below:
•
Image Capture to a microSD Card by Scanning a Special Label
• Image Capture to the Host by Host Command
Image Capture to a microSD Card by Scanning a Special Label
Insert a microSD card into the scanner, scan a capture label and place the item to be captured in
front of the scanner. Press and release the Camera Button. The image will be written to the
microSD card five seconds after button release.
The format, size, contrast, brightness and compression use the configured values.
This Capture label is as follows:
<FNC3>IMAGEFAUTO<CR>
The image filename is automatically increased from image000 to image999.
The date image file generated is not actual, since no real time clock is embedded in the scanner.
NOTE
The Capture label will not read unless a microSD card is inserted.