EasyManuals Logo

Datalogic QD2100 User Manual

Datalogic QD2100
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
RS-232/USB-Com Interfaces
50 QuickScan® QD2100
Beep On ASCII BEL
When this parameter is enabled, the reader issues a beep when a <BEL> character is de-
tected on the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal
entry or other important event.
Beep On Not on File
This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.
ENTER/EXIT PROGRAMMING MODE
Beep On ASCII BEL = Disable
Beep On ASCII BEL = Enable
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Beep On Not On File = Disable
Beep On Not On File = Enable
DEFAULT

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic QD2100 and is the answer not in the manual?

Datalogic QD2100 Specifications

General IconGeneral
Scanner TypeLinear Imager
Environmental SealingIP42
Operating Temperature0 to 50 °C / 32 to 122 °F
Scan Rate270 scans/sec
InterfaceRS-232, Keyboard Wedge, USB
Drop ResistanceWithstands drops from 1.5 m / 5.0 ft onto concrete
Print Contrast Ratio15%
Decode CapabilityAll standard 1D barcodes
Resolution0.102 mm / 4 mils
Storage Temperature-20 to 70 °C / -4 to 158 °F
Humidity5 to 95% non-condensing
Electrical SafetyEN60950-1
EMCEN 55022
Light SourceLED (red)

Related product manuals