Datalogic QD2100 - Optional Gs1-128 Add-On Timer

Add-Ons
Product Reference Guide 137
Add-Ons — cont.
Optional GS1-128 Add-On Timer
This option sets the timer expiration value to read the additional part after reading the
linear EAN/UPC part. For UPC/EAN add-ons other than those of this type, see Option-
al Add-On Timer on page 134
.
ENTER/EXIT PROGRAMMING MODE
Optional GS1-128 Add-On Timer = Disable
Optional GS1-128 Add-On Timer = 10ms
Optional GS1-128 Add-On Timer = 20ms
Optional GS1-128 Add-On Timer = 30ms
Optional GS1-128 Add-On Timer = 40ms
Optional GS1-128 Add-On Timer = 50ms
DEFAULT