Datalogic QD2100 - Optional Add-On Timer

Symbologies
134 QuickScan® QD2100
Add-Ons — cont.
Optional Add-On Timer
This option sets the time the reader will look for an add-on when an add-on fragment
has been seen and optional add-ons are enabled. (Also see Optional GS1-128 Add-On
Timer on page 137
.)
ENTER/EXIT PROGRAMMING MODE
Optional Add-on Timer = 10ms
Optional Add-on Timer = 20ms
Optional Add-on Timer = 30ms
Optional Add-on Timer = 40ms
Optional Add-on Timer = 50ms