Datalogic RIDA DBT6400 Quick Reference Guide

Setting Up the Reader
4RIDA™ DBT6400
Using the BC6020 Base Station
LEDs on BC6020 Base Station provide information about
the Base as well as the battery charging status, as shown
in the figure below.
The behaviour and meaning of the LEDs are summarized
in Table 1:
Table 1. Radio Base LEDs
LED Status
Power On/ Data
Yellow On = base is powered.
Yellow Blinking = base receives data and
commands from the Host or the reader.
Charging + Charge
completed
Green On = Power provided to scanner
for battery charging.
Charging indications are shown by the
scanner.
Power On/
Data LED
Charging

Datalogic RIDA DBT6400 Specifications

General

Scanner type	Handheld scanner
Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	-
Yaw reading angle	-60 - 60 °
Tilt reading angle	0 - 360 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	JAN, PostBar, RM4SCC / KIX
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked Omnidirectional, Han Xin, MaxiCode, Micro QR Code, MicroPDF417, QR Code
Wireless range	25 m
Bluetooth version	4.0
Operating frequency	2400 MHz
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Battery life	5 h
Charging time	2.5 h
Battery capacity	700 mAh
Power source type	Battery
Number of reads per charge	3000
Number of batteries supported	1
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	White
International Protection (IP) code	IP50
Sustainability certificates	RoHS
Cables included	No
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	42.3 mm
Width	112.5 mm
Height	27.5 mm
Weight	85 g