Datalogic RIDA DBT6400 Quick Reference Guide

Base Station Indications
44 RIDA™ DBT6400
Warranty Claims Process
In order to obtain service under the Factory Warranty,
Customer must notify Datalogic of the claimed defect
before the expiration of the applicable Warranty period
and obtain from Datalogic a return authorization number
(RMA) for return of the product to a designated Datalogic
service center. If Datalogic determines Customer’s claim is
valid, Datalogic will repair or replace product without addi-
tional charge for parts and labor. Customer shall be
responsible for packaging and shipping the product to the
designated Datalogic service center, with shipping charges
prepaid. Datalogic shall pay for the return of the product
to Customer if the shipment is to a location within the
country in which the Datalogic service center is located.
Customer shall be responsible for paying all shipping
charges, duties, taxes, and any other charges for products
returned to any other locations. Failure to follow the
applicable RMA policy, may result in a processing fee.
Customer shall be responsible for return shipment
expenses for products which Datalogic, at its sole discre-
tion, determines are not defective or eligible for warranty
repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified,
altered, repaired or upgraded by other than Datalogic
service personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic
determines was caused by faulty operations, improper
use, abuse, misuse, wear and tear, negligence,
improper storage or use of parts or accessories not
approved or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of
product with any other instrument, equipment or
apparatus;
(iv) any claimed defect or damage caused by the failure to
provide proper maintenance, including but not limited
to cleaning the upper window in accordance with
product manual;
(v) any defect or damage caused by natural or man-made
disaster such as but not limited to fire, water damage,
floods, other natural disasters, vandalism or abusive
events that would cause internal and external compo-
nent damage or destruction of the whole unit, con-
sumable items;
(vi) any damage or malfunctioning caused by non-restor-
ing action as for example firmware or software
upgrades, software or hardware reconfigurations etc.;

Datalogic RIDA DBT6400 Specifications

General

Scanner type	Handheld scanner
Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	-
Yaw reading angle	-60 - 60 °
Tilt reading angle	0 - 360 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	JAN, PostBar, RM4SCC / KIX
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked Omnidirectional, Han Xin, MaxiCode, Micro QR Code, MicroPDF417, QR Code
Wireless range	25 m
Bluetooth version	4.0
Operating frequency	2400 MHz
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Battery life	5 h
Charging time	2.5 h
Battery capacity	700 mAh
Power source type	Battery
Number of reads per charge	3000
Number of batteries supported	1
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	White
International Protection (IP) code	IP50
Sustainability certificates	RoHS
Cables included	No
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	42.3 mm
Width	112.5 mm
Height	27.5 mm
Weight	85 g