Datalogic Skorpio - Inserting Mini SD Card

INTRODUCTION
1
1.4 INSERTING MINI SD CARD
Datalogic Skorpio™ provides the possibility to add a mini storage disk to increase the
on-board memory capacity. To access the Mini SD card slot and to insert the card,
proceed as follows:
1a. Turn off the Datalogic Skorpio™ and remove the battery pack, by turning its
lock screw to the open position (horizontal) and pulling the lock runner up.
1b. Turn off the Datalogic Skorpio-GUN™ and remove the battery pack, by
pulling the battery latch down.
5